Forums Help & support HMAC error, I'm sure I have the correct PW

This topic contains 5 replies, has 3 voices, and was last updated by  Dingus 5 years, 1 month ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #12764 Reply

    Dingus

    I’m using version 1.7.3180.0 and  I have a batch of files I encrypted years ago. I can open every file with my password, but this file keeps on giving a HMAC error. Looking in your FAQ I get referred to axcrypt.com, wich doesn’t exist anymore… I read in another HMAC post I should be able to get Axcrypt into debug mode, but HOW?! Any help would be appreciated.

    #12765 Reply

    Dingus

    the error

    #12767 Reply

    Svante
    Spectator

    Hello Dingus,

    The error indicates the file is damaged. You can try to decrypt it anyway, you’ll find instructions at http://www.axantum.com/ where you can find a registry setting to enable it to try even with a broken file.

    The version you are using is unsupported and unmaintained, but you will find information as mentioned above.

    There should be no link to “axcrypt dot com” on any FAQ we have – can you give a URL to that page? (We’ve never actually had that domain).

    #12789 Reply

    Dingus

    Hello Svante, you are 100% right, I made a mistake!

    ——“There should be no link to “axcrypt dot com” on any FAQ we have – can you give a URL to that page?”—–

    I meant http://www.axantum.com .

    Now back to my problem;

    http://www.axantum.com leads to a page where no support is located, it leads to the new site https://forum.axcrypt.net

    On that site I am only able to locate the following:

    What to do?

    How do I proceed? I would greatly appreciate a link to the part on how to change the .reg setting so it will try to read the file. Thank you in advance!

    #12809 Reply

    Azhaguraja B
    Keymaster

    Hello Dingus,

    You’ll find instructions at http://www.axantum.com/AxCrypt/LegacyRegistry.html to find a registry settings to enable it to try even with a broken file [as per svante explained in the last response].

    You can also try to decrypt the damaged file with the AxCrypt 2.x app.

    AxCrypt 2.x has a feature called Try Broken File. You can decrypt the corrupted/damaged AxCrypt encrypted files by navigating the menu Debug | Try Broken File from the AxCrypt app.

    First we need to enable the Debug menu via the menu options File | Options | enable Debug from the AxCrypt app.

    Navigate to the debug menu and click the Try Broken File menu option.

    Now we will be prompted for file selection.

    Select the corrupted/damaged encrypted file and then AxCrypt will try to decrypt the file. If successfully decrypted then you are able to see the decrypted file in the location. Otherwise AxCrypt unable to process(decrypt) the file.

    #12824 Reply

    Dingus

    @ Azhaguraja B, Thankyou! Changed the value to 1 and while it still gave the error, the file opened! Thank you both for your time!

Viewing 6 posts - 1 through 6 (of 6 total)
Reply To: HMAC error, I'm sure I have the correct PW
Your information: